http://www.tracopower.com page 1 of 4 industrial power supplies tpc series, 30 to 120 watt features for industrial, offce and residential environments meets european erp directive (green mode), <0.3 w no load power consumption high effciency across full load range compact plastic case reliable snap-on mounting on din-rails or with wall mounting bracket (included) adaptor for wall mounting included universal input 85C264 vac, 47C63 hz models with 5, 12, 24 & 48 vdc output output voltage adjustable power good signal low ripple and noise overload and short-circuit protection optional module for parallel and redundant operation worldwide safety approval package 3-year product warranty the tracopower tpc series is a family of lightweight din-rail power supplies with an excellent price/performance ratio. they consume sparse standby power, and op - erate with high effciency to comply with the requirements of the european ecodesign directive. they have universal input of 85-264vac or 90-375vdc and are designed for class i operation in industrial and residential environments. with the optional active current sharing redundancy module, these power supplies provide a very reliable true redundant dc supply. for further details see page 3. order code input voltage output power output voltage output current ranges max. nominal /adj. range max. tpc 030C105 20 w 5.0 vdc /5.0C6.0 vdc 4.0 a tpc 030C112 26 w 12 vdc /12C15 vdc 2.2 a tpc 030C124 30 w 24 vdc /24C28.8 vdc 1.25 a tpc 030C148 85 C 264 vac 30 w 48 vdc /48C56 vdc 0.6 a tpc 055C112 universal input 42 w 12 vdc / 12C15 vdc 3.5 a tpc 055C124 47/63 hz 55 w 24 vdc /24C28.8 vdc 2.3 a tpc 055C148 90 C 375 vdc 55 w 48 vdc / 48C56 vdc 1.15 a tpc 080C112 72 w 12 vdc / 12C15 vdc 6.0 a tpc 080C124 80 w 24 vdc /24C28.8 vdc 3.3 a tpc 080C148 80 w 48 vdc /48C56 vdc 1.7 a tpc 120C112 96 w 12 vdc / 12C15 vdc 8.0 a tpc 120C124 120 w 24 vdc /24C28.8 vdc 5.0 a tpc 120C148 120 w 48 vdc /48C56 vdc 2.5 a models ul 60 95 0- 1u l 50 8 cb scheme
http://www.tracopower.com page 2 of 4 industrial power supplies tpc series 30 to 120 watt input specifications input voltage range C ac nominal rated 110 C 240 vac, 50-60 hz C ac range (designed for) 85 C 264 vac, 47-63 hz C dc nominal rated 130 C 300 vdc C dc range (designed for) 90 C 375 vdc output derating C at operation <100 vac - 2.5% /v C at operation <130 vdc - 1.0 % /vd c standby power consumption tpc 030 and 055 models: < 0.3 w tpc 080 and 120 models: < 0.5 w harmonic limits en 61000-3-2, class a recommended circuit breaker, characteristic c 6.0 C 16.0 a output specifications output voltage adjustable range 5 vdc model: 5.0 C 6.0 vdc (potentiometer on frontpanel) 12 vdc models: 12 C 15 vdc 24 vdc models: 24 C 28.8 vdc 48 vdc models: 48 C 56 vdc regulation C input variation 0.5 % max. C load variation (0C100 %) 5 vdc models: 0.75 % max. other models: 0.5 % max. ripple and noise (20mhz bandwidth) 100 mvpk-pk max. short circuit protection <200 % of iout nom. overvoltage protection (% of max. adjustable voltage) 5 vdc model: <180 % 12 vdc models: <170 % 24 vdc models: <160 % 48 vdc models: <107 % power back immunity 125 % of nominal vout start-up time 2 sec. max. hold-up time (115 vac / 230 vac) min. 15 ms / min. 40 ms power ok signal C trigger 80 C 95 % C pnp open collector max. current 48 vdc models: 5 ma other models: 10 ma general specifications t emperature ranges C operating C25c to +70c max. C storage (non operating) C25c to +85c temperature derating 2.5 %/k above 50c humidity (non condensing) 95 % rel. h max. temperature coefficient 0.02 %/k remote on/off 10 ma via internal 100 ohm resistor 2 pin molex male terminal kk series (mating connector/cable not included) mating connector cable order code tba. efficiency (average at power consumption 25-100%) tpc 030-105: 79 % other 30 watt models: 84 % other models: 87 % reliability, calculated mtbf at +25c tpc 030 models: >2.2 mio h (according to iec-1709) tpc 055 models: >1.7 mio h tpc 080 models: >1.5 mio h tpc 120 models: >1.3 mio h altitude during operation 2000m max. (6500 ft) approved
http://www.tracopower.com page 3 of 4 general specifications safety standards iec 60950-1, en 60950-1 (output selv), ul 60950-1, ul 508, en 50178, en 60204, en 61558-2-8. safety approvals C cb scheme (iec 60950-1) www.tracopower.com/products/tpc-cb.pdf C ul listing (entry pending) ul 508c listed, csa c22.2 no. 14 file e210002 www.ul.com -> certifications C ul recognition (entry pending) ul 60950, file e181381 www.ul.com -> certifications C csa certification ul 60950-1, csa 60950-1-03 www.tracopower.com/products/tpc-csa.pdf C bg certificate (by siq) (iec/en 60950-1) www.tracopower.com/products/tpc-bg.pdf environmental compliance C reach www.tracopower.com/products/tpc-reach.pdf C rohs rohs directive 2011/65/eu electromagnetic compatibility (emc), emissions en 61000-6-3 (residential environment) electromagnetic compatibility (emc), immunity en 61000-6-2 (industrial environment) C voltage sag inmmunity www.tracopower.com/products/tpc-semif47.pdf class of protection class i (earth connection needed) case protection ip 20 ( iec 60529) enclosure material makrolon 2405 (ul 94v-0 rated) mounting din-rails as per en 50022-35x15/7.5 (snap-on with self-locking spring or wall moun ting with bracket) (included) installation instructions www.tracopower.com/products/tpc-inst.pdf industrial power supplies tpc series 30 to 120 watt all specifcations valid at nominal input voltage, full load and +25c after warm-up time unless otherwise stated. tpcCrem240-24 redundancy module these modules are external units for operation with two tpc power supplies with output voltage of 24 vdc or 48 vdcand of same type and power. the modules allow to connect two outputs of tpc power supplies together in order to achieve a reliable dc supply. in normal operation the module achieves equal current share for both power supplies connected. during the redundancy operation, if one of the power supplies fails, the output power will be provided in full by the remain - ing operating power supply. the redundancy of the dc system is monitored by a dc-ok signal. order code nominal input voltage max power per input output voltage adjustable output current max. tpcCrem240C24 24 vdc 120 w 24 C 27 vdc 10 a tpcCrem240C48 48 vdc 48 C 55 vdc 5 a specifications operating temperature C25c to +50c max. electromagnetic compatibility in correspondence to connected units (no internal switching device) dimensions same as model tpc 055 (see page 4) connection screw terminal block installation instructions www.tracopower.com/products/tpc-rem-inst.pdf
page 4 of 4 industrial power supplies tpc series 30 to 120 watt rev. 07/12.1 specifcations can be changed any time without notice. case dimensions dimensions in [mm], ( ) = inch tolerances: 0.5 mm (0.02) d -- ++ dc- ok pe nl dc-o n v adj. w h wall mounting bracket instead on a din-rail, the modules can be also mounted on a chassis or wall with help of a mounting bracket which is supplied as standard with each power supply model width (w) heigth depth d tpc 030 26.5 (1.04) 90 (3.54) 96.5 (3.80) tpc 055 45.0 (1.77) 90 (3.54) 96.5 (3.80) tpc-rem 240-24 45.0 (1.77 90 (3.54) 96.5 (3.80) tpc 080 63.0 (2.48) 90 (3.54) 96.5 (3.80) tpc 120 72.0 (2.83) 90 (3.54) 110.0 (4.33) jenatschstrasse 1 ch-8002 zurich switzerland t el. +41 43 311 45 11 fax +41 43 311 45 45 info@traco.ch www .tracopower .com
|
